Part 2: Operating the Important Routines.
| 1. | The Price [5-2] Unit Measuring Tool and [aAbB-cCdD] Markers for [E] Wave routine | CSV-11 |
| 2 | RETRACEMENT TOOL: The [aA-bB] Retracement Tool. | CSV-12 |
| 3 | The chart high low range LAYER OVERLAY Tool for a Zoomed Range. | CSV-13 |
| 4 | ALTERNATE WAVE PROJECTION TOOL: [aA-bB and cC] Projection Tool. | CSV-14 |
| 5 | The Swing Location Tool. [Alt S] | CSV-15 |
| 6 | X-ABCD Interogation - Looking for Ratios in waves of similar degree. | CSV-16 |
| 7 | The [Alt X] Swing interogation tool for the automatic examination of the [cC-dD] leg and finer points. | CSV-17 |
| 8 |
You should be getting the idea by now if you have worked through the examples above. | |
| 9 | Drawing Tools - Trend Lines [aA/bB - T] - Horizontal Lines [g] - Cycle Routine [W] with (aA-bB) | CSV-19 |
| 10 | Gann SQR 9 projections from highs or lows [Alt H or L] | CSV-20 |
| 11 | Gann Interogation of an [aA-bB] marked move - [Alt Q] | CSV-21 |
| 12 | Gann Angles from highs or lows - [Alt A] | CSV-21 |
| 13 | Gann Squaring Range Routine [P] - redraw SQUARE chart [*] - Change 1x1 rate [S] | CSV-21 |
| 14 | The % Change Tool for projecting a level & The $ unit Tool for projecting a level. | CSV-22 |
| 15 | CHART GRIDS - Vertical time cycles [Shift W] and Incremented price levels [Shift G] | CSV-23 |
| 16 | Time RATIO Projection Routine [Alt T] | CSV-24 |
| 17 | Clearing a chart of workings [Q] - With some GANN ROUTINES | CSV-25 |
| 18 | Edit in a new price level to a bar - HIGH or LOW [Alt E] | |
| Check (abcd) Marker Location Routine. [M] | ||
| MAIN MODE Routines: | ||
| To erase all lines and return
chart to default - Key [Q] - also clears and restores MAIN MODE |
||
| Gann Trend SWING routine (2-34 bars) - Key [S] then enter value. | CSV-S |
|
| Average Range over last 10 bars - Key [A] | CSV-A |
|
| Change Scale for Chart high to low range. - Key [|] |
To CLEAR SCREEN of workings Key [Q] the
aAbB markers will remain where you tagged them.
If you want to see where the markers are Key
[M] in Scroll Mode.
SINGLE RETRACEMENTS:
This routine is a trial and error routine
until
you visually see the waves you wish to isolate for analysis.
If the swings are to large reduce the unit value
- if they are to small increase the unit value.
You can keep overlaying swings until you get
the
right perspective, when you find it you can clear
all workings [Q] and then go back and run the
[Alt S] at the value you wish to use.
X-ABCD Report [Shift X]:
First run the [Alt S] to create the swings - then Key [Shift X]
The [Shift X] Swing interogation Tool for the [Alt S] and the X-ABCD
Calculations.
DRAWING TOOLS
Trend Lines [T]
Cycles [W] - Vertical Lines [Shift W] not illustrated
Price Levels [Shift G]
If you want Grids use a value for the grids e.g., 10 points.
If you want to draw GANN Angles use the [Alt A] prompt and select
any
angle, eg., 0.500 = 1x2
If you want to set the 1x1 angle rate to any value, eg., 1 unit per
hour use the [S] key.
Angles are probably a bit nebulous for intra-day trading so I wouldn't worry about them to much.
DRAWING TOOLS: [$] [%]
VERTICAL & HORIZONTAL COUNTERS:
Place Indicator on point where projection is to begin and Key [Alt T] - follow the prompts.
If you wanted to do Fibonacci Counters use the [2] Elliott selection
and ENTER a time count of 144 like
this example.
CLEAR A CHART OF WORKINGS: [Q]
All routines demonstrated are subject to my copyright.
Bryce Gilmore & Associates Pty Ltd.
ABN 63 006 187 686
6 Heywood Place. Helensvale. QLD.
4212.
Australia.
Phone
61-7-5573 2283 or Fax 61-7-5573 2283
Mobile 0419 576 923